----------------------------------------------------------------------
1. ScanGear CS 8.3 Features
ScanGear CS 8.3 for Windows (hereafter referred to as 'ScanGear CS')
is a 32-bit TWAIN-compliant scanner driver for Canon CanoScan 3000/3000F
scanner. When this driver is selected from within a TWAIN-compliant
application program, this scanner can be used to scan image data.
2. A General Tip on Usage Canon CanoScan 3000ex
o Only run one application at a time that is actively linked to
ScanGear CS. Do not open more than one application that is actively
linked to ScanGear CS.
Also, do not open ScanGear CS more than once to acquire an image in
the same application.
o If you scan a very large image at high resolution, some applications
may determine that there is not enough disk space to scan and save
the image, and will return an error.
o If the image size is large, such as when you scan a large image at a
high resolution, for using some applications, the progress bar may
freeze at 0% due to limitations of the application.
In this case, click the Cancel button on the progress bar, and then
select a smaller area or lower resolution and try scanning again.
o With Windows 2000 or XP, the TWAIN data source may not open
correctly from time to time when the system file is in the NTFS
format.
For security reasons, the TWAIN module cannot be written to the
'winnt' directory. For details, contact your system administrator.
o Some application programs may hide the TWAIN user interface.
In this case, refer to the application programer's manual to find
out the required setting changes to show the TWAIN user interface.
o Always close the ScanGear CS main window before you exit the parent
application program.
o With Windows 2000 or XP, the system administrator is required to
install or uninstall ScanGear CS.
o Certain personal computers (including laptops) may not restart
correctly from standby mode when the scanner Canon CanoScan 3000ex is attached. If this
occurs, please reboot the computer.
o The scanner Canon CanoScan 3000ex button may not operate after you install the driver. In
this case, restart the system.
o When you preview or scan an image with a relatively uniform
background, the Auto Tone function may change its coloring.
If this occurs, reset the Auto Tone.
o With Windows Me, the scanner Canon CanoScan 3000ex may not be detected after the USB cable
has been disconnected and reconnected. If this occurs, please reboot
the computer.
o Some applications may close ScanGear CS automatically after scanning.
3. Running ScanGear CS with Specific Applications
o If more than one scanner exists on the system when using
Caere PageKeeper or Caere OmniPage Pro, set the scanner being
used as the default scanner in the Caere Scan Manager in the
Control Panel.
o Images after the first image can not be passed on to the linked
application when the Multi Photo Scan function is used with
Microsoft Word 2000, Excel 2000 or PowerPoint 2000.
4. Notes when using the scanner Canon CanoScan 3000ex after switching users in Windows XP
o The scanner Canon CanoScan 3000ex may be unable to operate if a large portion of the
system resources, such as the memory, is being used by another user.
In this case, close any programs that are open in the other user
environment before scanning.
o An error will occur if the user is switched while the
ScanGear CS software is running (even when scanning is in
progress). Before switching the user, exit the ScanGear CS
software, and then save the scanned image. Restart the system
if the error has occurred.
. 1 Answer SOURCE: Here is the link to your drivers and as far as them not having them anymore it might be a cost saving idea.Bad move for customers.There just not carrying a lot of the drivers on the servers for devices that they sold from years prior then 2011.They sold the scanner in 2004 and they should keep they drivers available for a reasonable 25 years it's only data. Good luck hope it helps. Posted on Jul 27, 2011.
CanoScan 3000F illustrations are shown when the procedures are the same for both the CanoScan 3000F and CanoScan 3000 models. 1 Peel the seals off the scanner. 2 Gently turn the scanner over. 3 Push the lock switch toward the unlock mark ( ). 4 Return the scanner to a horizontal position. If you want to find another driver for canoscan 3000/3000f device click here. CS-FR3000 Icom Software for FR3000 & FR4000. Cs 3000 scanner: Cs3000 series companion scanner support & downloads, zebra this site uses cookies to provide an improved digital experience. TI 33Q01B10-01E Technical Information, Yokogawa Electric.
ScanGear CS 8.3.0.0 - 1. ScanGear CS 8.3 Features ScanGear CS 8.3 for Windows (hereafter referred to as 'ScanGear CS') is a 32-bit TWAIN-compliant scanner driver for Canon CanoScan 3000/3000F scanner.
When this driver is selected from within a TWAIN-compliant application program, this scanner can be used to scan image data. A General Tip on Usage Canon CanoScan 3000ex o Only run one application at a time that is actively linked to ScanGear CS. Do not open more than one application that is actively linked to ScanGear CS.
Also, do not open ScanGear CS more than once to acquire an image in the same application. O If you scan a very large image at high resolution, some applications may determine that there is not enough disk space to scan and save the image, and will return an error. O If the image size is large, such as when you scan a large image at a high resolution, for using some applications, the progress bar may freeze at 0% due to limitations of the application. In this case, click the Cancel button on the progress bar, and then select a smaller area or lower resolution and try scanning again. O With Windows 2000 or XP, the TWAIN data source may not open correctly from time to time when the system file is in the NTFS format.
For security reasons, the TWAIN module cannot be written to the 'winnt' directory. For details, contact your system administrator.
O Some application programs may hide the TWAIN user interface. In this case, refer to the application programer's manual to find out the required setting changes to show the TWAIN user interface. O Always close the ScanGear CS main window before you exit the parent application program.
O With Windows 2000 or XP, the system administrator is required to install or uninstall ScanGear CS. O Certain personal computers (including laptops) may not restart correctly from standby mode when the scanner Canon CanoScan 3000ex is attached.
If this occurs, please reboot the computer. O The scanner Canon CanoScan 3000ex button may not operate after you install the driver. Sql server for mac. In this case, restart the system. O When you preview or scan an image with a relatively uniform background, the Auto Tone function may change its coloring. If this occurs, reset the Auto Tone.
O With Windows Me, the scanner Canon CanoScan 3000ex may not be detected after the USB cable has been disconnected and reconnected. If this occurs, please reboot the computer. O Some applications may close ScanGear CS automatically after scanning. Running ScanGear CS with Specific Applications o If more than one scanner exists on the system when using Caere PageKeeper or Caere OmniPage Pro, set the scanner being used as the default scanner in the Caere Scan Manager in the Control Panel.
O Images after the first image can not be passed on to the linked application when the Multi Photo Scan function is used with Microsoft Word 2000, Excel 2000 or PowerPoint 2000. Notes when using the scanner Canon CanoScan 3000ex after switching users in Windows XP o The scanner Canon CanoScan 3000ex may be unable to operate if a large portion of the system resources, such as the memory, is being used by another user. In this case, close any programs that are open in the other user environment before scanning. O An error will occur if the user is switched while the ScanGear CS software is running (even when scanning is in progress). Before switching the user, exit the ScanGear CS software, and then save the scanned image. Restart the system if the error has occurred.
ScanGear CS 8.3.0.0 - 1. ScanGear CS 8.3 Features ScanGear CS 8.3 for Windows (hereafter referred to as 'ScanGear CS') is a 32-bit TWAIN-compliant scanner driver for Canon CanoScan 3000/3000F scanner. When this driver is selected from within a TWAIN-compliant application program, this scanner can be used to scan image data. A General Tip on Usage Canon CanoScan 3000ex o Only run one application at a time that is actively linked to ScanGear CS.
Do not open more than one application that is actively linked to ScanGear CS. Also, do not open ScanGear CS more than once to acquire an image in the same application. O If you scan a very large image at high resolution, some applications may determine that there is not enough disk space to scan and save the image, and will return an error. O If the image size is large, such as when you scan a large image at a high resolution, for using some applications, the progress bar may freeze at 0% due to limitations of the application. In this case, click the Cancel button on the progress bar, and then select a smaller area or lower resolution and try scanning again. O With Windows 2000 or XP, the TWAIN data source may not open correctly from time to time when the system file is in the NTFS format.
For security reasons, the TWAIN module cannot be written to the 'winnt' directory. For details, contact your system administrator. O Some application programs may hide the TWAIN user interface.
In this case, refer to the application programer's manual to find out the required setting changes to show the TWAIN user interface. O Always close the ScanGear CS main window before you exit the parent application program. O With Windows 2000 or XP, the system administrator is required to install or uninstall ScanGear CS. O Certain personal computers (including laptops) may not restart correctly from standby mode when the scanner Canon CanoScan 3000ex is attached.
If this occurs, please reboot the computer. O The scanner Canon CanoScan 3000ex button may not operate after you install the driver. In this case, restart the system. O When you preview or scan an image with a relatively uniform background, the Auto Tone function may change its coloring.
If this occurs, reset the Auto Tone. O With Windows Me, the scanner Canon CanoScan 3000ex may not be detected after the USB cable has been disconnected and reconnected. If this occurs, please reboot the computer. O Some applications may close ScanGear CS automatically after scanning. Running ScanGear CS with Specific Applications o If more than one scanner exists on the system when using Caere PageKeeper or Caere OmniPage Pro, set the scanner being used as the default scanner in the Caere Scan Manager in the Control Panel. O Images after the first image can not be passed on to the linked application when the Multi Photo Scan function is used with Microsoft Word 2000, Excel 2000 or PowerPoint 2000. Notes when using the scanner Canon CanoScan 3000ex after switching users in Windows XP o The scanner Canon CanoScan 3000ex may be unable to operate if a large portion of the system resources, such as the memory, is being used by another user.
In this case, close any programs that are open in the other user environment before scanning. O An error will occur if the user is switched while the ScanGear CS software is running (even when scanning is in progress). Before switching the user, exit the ScanGear CS software, and then save the scanned image. Restart the system if the error has occurred. ScanGear CS 8.3.0.0 - 1. ScanGear CS 8.3 Features ScanGear CS 8.3 for Windows (hereafter referred to as 'ScanGear CS') is a 32-bit TWAIN-compliant scanner driver for Canon CanoScan 3000/3000F scanner. When this driver is selected from within a TWAIN-compliant application program, this scanner can be used to scan image data.
Canon Canoscan 3000ex Drivers For Mac Windows 10
A General Tip on Usage Canon CanoScan 3000ex o Only run one application at a time that is actively linked to ScanGear CS. Do not open more than one application that is actively linked to ScanGear CS.
Canon Canoscan Driver Lide 210
Also, do not open ScanGear CS more than once to acquire an image in the same application. O If you scan a very large image at high resolution, some applications may determine that there is not enough disk space to scan and save the image, and will return an error. O If the image size is large, such as when you scan a large image at a high resolution, for using some applications, the progress bar may freeze at 0% due to limitations of the application. In this case, click the Cancel button on the progress bar, and then select a smaller area or lower resolution and try scanning again. O With Windows 2000 or XP, the TWAIN data source may not open correctly from time to time when the system file is in the NTFS format. For security reasons, the TWAIN module cannot be written to the 'winnt' directory. For details, contact your system administrator.
O Some application programs may hide the TWAIN user interface. In this case, refer to the application programer's manual to find out the required setting changes to show the TWAIN user interface. O Always close the ScanGear CS main window before you exit the parent application program. O With Windows 2000 or XP, the system administrator is required to install or uninstall ScanGear CS.
O Certain personal computers (including laptops) may not restart correctly from standby mode when the scanner Canon CanoScan 3000ex is attached. If this occurs, please reboot the computer. O The scanner Canon CanoScan 3000ex button may not operate after you install the driver. In this case, restart the system. O When you preview or scan an image with a relatively uniform background, the Auto Tone function may change its coloring. If this occurs, reset the Auto Tone. O With Windows Me, the scanner Canon CanoScan 3000ex may not be detected after the USB cable has been disconnected and reconnected.
If this occurs, please reboot the computer. O Some applications may close ScanGear CS automatically after scanning. Running ScanGear CS with Specific Applications o If more than one scanner exists on the system when using Caere PageKeeper or Caere OmniPage Pro, set the scanner being used as the default scanner in the Caere Scan Manager in the Control Panel. O Images after the first image can not be passed on to the linked application when the Multi Photo Scan function is used with Microsoft Word 2000, Excel 2000 or PowerPoint 2000. Notes when using the scanner Canon CanoScan 3000ex after switching users in Windows XP o The scanner Canon CanoScan 3000ex may be unable to operate if a large portion of the system resources, such as the memory, is being used by another user. In this case, close any programs that are open in the other user environment before scanning. O An error will occur if the user is switched while the ScanGear CS software is running (even when scanning is in progress).
Before switching the user, exit the ScanGear CS software, and then save the scanned image. Restart the system if the error has occurred. Canon Scanner WIA Driver 1.2.1 - 1. Canon Scanner WIA Driver 1.2.1 Features Canon Scanner WIA Driver 1.2.1 (hereafter referred to as 'Canon Scanner WIA Driver') is a WIA and TWAIN-compliant scanner driver for the Canon Scanner. When this driver is selected from within a WIA or TWAIN-compliant software application program, scanners can be used to scan image data. Canon Scanner WIA Driver also can work as an stand-alone program.
What You Need Required Hardware o Computer:IBM or IBM compatible PC. O 233 megahertz (MHz) Pentium or higher microprocessor (or equivalent) o RAM: 128 megabytes (MB) recommended (64 MB of RAM minimum;4 gigabytes (GB) of RAM maximum) o Free disk space, at least 50 MB. The amount of space required depends on the scanning area and the Color Mode or Resolution setting. (Color images scanned at higher resolution require more storage space.) o Canon scanners CanoScan 3000/3000F Required Software o Microsoft Windows XP Home Edition/Professional o WIA or TWAIN-compliant application software 3. A General Tip on Usage Canon CanoScan 3000ex o The Canon Scanner WIA Driver and ScanGear CS (TWAIN driver) cannot be present (installed) on the same system for the same scanner at the same time. O Some of the Canon Scanner WIA Driver functions are limited in comparison to ScanGear CS.
Also, do not open ScanGear CS more than once to acquire an image in the same application. O If you scan a very large image at high resolution, some applications may determine that there is not enough disk space to scan and save the image, and will return an error. O If the image size is large, such as when you scan a large image at a high resolution, for using some applications, the progress bar may freeze at 0% due to limitations of the application. In this case, click the Cancel button on the progress bar, and then select a smaller area or lower resolution and try scanning again. O With Windows 2000 or XP, the TWAIN data source may not open correctly from time to time when the system file is in the NTFS format.
For security reasons, the TWAIN module cannot be written to the 'winnt' directory. For details, contact your system administrator.
O Some application programs may hide the TWAIN user interface. In this case, refer to the application programer's manual to find out the required setting changes to show the TWAIN user interface. O Always close the ScanGear CS main window before you exit the parent application program.
O With Windows 2000 or XP, the system administrator is required to install or uninstall ScanGear CS. O Certain personal computers (including laptops) may not restart correctly from standby mode when the scanner Canon CanoScan 3000ex is attached.
If this occurs, please reboot the computer. O The scanner Canon CanoScan 3000ex button may not operate after you install the driver. Sql server for mac. In this case, restart the system. O When you preview or scan an image with a relatively uniform background, the Auto Tone function may change its coloring. If this occurs, reset the Auto Tone.
O With Windows Me, the scanner Canon CanoScan 3000ex may not be detected after the USB cable has been disconnected and reconnected. If this occurs, please reboot the computer. O Some applications may close ScanGear CS automatically after scanning. Running ScanGear CS with Specific Applications o If more than one scanner exists on the system when using Caere PageKeeper or Caere OmniPage Pro, set the scanner being used as the default scanner in the Caere Scan Manager in the Control Panel.
O Images after the first image can not be passed on to the linked application when the Multi Photo Scan function is used with Microsoft Word 2000, Excel 2000 or PowerPoint 2000. Notes when using the scanner Canon CanoScan 3000ex after switching users in Windows XP o The scanner Canon CanoScan 3000ex may be unable to operate if a large portion of the system resources, such as the memory, is being used by another user. In this case, close any programs that are open in the other user environment before scanning. O An error will occur if the user is switched while the ScanGear CS software is running (even when scanning is in progress). Before switching the user, exit the ScanGear CS software, and then save the scanned image. Restart the system if the error has occurred.
ScanGear CS 8.3.0.0 - 1. ScanGear CS 8.3 Features ScanGear CS 8.3 for Windows (hereafter referred to as 'ScanGear CS') is a 32-bit TWAIN-compliant scanner driver for Canon CanoScan 3000/3000F scanner. When this driver is selected from within a TWAIN-compliant application program, this scanner can be used to scan image data. A General Tip on Usage Canon CanoScan 3000ex o Only run one application at a time that is actively linked to ScanGear CS.
Do not open more than one application that is actively linked to ScanGear CS. Also, do not open ScanGear CS more than once to acquire an image in the same application. O If you scan a very large image at high resolution, some applications may determine that there is not enough disk space to scan and save the image, and will return an error. O If the image size is large, such as when you scan a large image at a high resolution, for using some applications, the progress bar may freeze at 0% due to limitations of the application. In this case, click the Cancel button on the progress bar, and then select a smaller area or lower resolution and try scanning again. O With Windows 2000 or XP, the TWAIN data source may not open correctly from time to time when the system file is in the NTFS format.
For security reasons, the TWAIN module cannot be written to the 'winnt' directory. For details, contact your system administrator. O Some application programs may hide the TWAIN user interface.
In this case, refer to the application programer's manual to find out the required setting changes to show the TWAIN user interface. O Always close the ScanGear CS main window before you exit the parent application program. O With Windows 2000 or XP, the system administrator is required to install or uninstall ScanGear CS. O Certain personal computers (including laptops) may not restart correctly from standby mode when the scanner Canon CanoScan 3000ex is attached.
If this occurs, please reboot the computer. O The scanner Canon CanoScan 3000ex button may not operate after you install the driver. In this case, restart the system. O When you preview or scan an image with a relatively uniform background, the Auto Tone function may change its coloring.
If this occurs, reset the Auto Tone. O With Windows Me, the scanner Canon CanoScan 3000ex may not be detected after the USB cable has been disconnected and reconnected. If this occurs, please reboot the computer. O Some applications may close ScanGear CS automatically after scanning. Running ScanGear CS with Specific Applications o If more than one scanner exists on the system when using Caere PageKeeper or Caere OmniPage Pro, set the scanner being used as the default scanner in the Caere Scan Manager in the Control Panel. O Images after the first image can not be passed on to the linked application when the Multi Photo Scan function is used with Microsoft Word 2000, Excel 2000 or PowerPoint 2000. Notes when using the scanner Canon CanoScan 3000ex after switching users in Windows XP o The scanner Canon CanoScan 3000ex may be unable to operate if a large portion of the system resources, such as the memory, is being used by another user.
In this case, close any programs that are open in the other user environment before scanning. O An error will occur if the user is switched while the ScanGear CS software is running (even when scanning is in progress). Before switching the user, exit the ScanGear CS software, and then save the scanned image. Restart the system if the error has occurred. ScanGear CS 8.3.0.0 - 1. ScanGear CS 8.3 Features ScanGear CS 8.3 for Windows (hereafter referred to as 'ScanGear CS') is a 32-bit TWAIN-compliant scanner driver for Canon CanoScan 3000/3000F scanner. When this driver is selected from within a TWAIN-compliant application program, this scanner can be used to scan image data.
Canon Canoscan 3000ex Drivers For Mac Windows 10
A General Tip on Usage Canon CanoScan 3000ex o Only run one application at a time that is actively linked to ScanGear CS. Do not open more than one application that is actively linked to ScanGear CS.
Canon Canoscan Driver Lide 210
Also, do not open ScanGear CS more than once to acquire an image in the same application. O If you scan a very large image at high resolution, some applications may determine that there is not enough disk space to scan and save the image, and will return an error. O If the image size is large, such as when you scan a large image at a high resolution, for using some applications, the progress bar may freeze at 0% due to limitations of the application. In this case, click the Cancel button on the progress bar, and then select a smaller area or lower resolution and try scanning again. O With Windows 2000 or XP, the TWAIN data source may not open correctly from time to time when the system file is in the NTFS format. For security reasons, the TWAIN module cannot be written to the 'winnt' directory. For details, contact your system administrator.
O Some application programs may hide the TWAIN user interface. In this case, refer to the application programer's manual to find out the required setting changes to show the TWAIN user interface. O Always close the ScanGear CS main window before you exit the parent application program. O With Windows 2000 or XP, the system administrator is required to install or uninstall ScanGear CS.
O Certain personal computers (including laptops) may not restart correctly from standby mode when the scanner Canon CanoScan 3000ex is attached. If this occurs, please reboot the computer. O The scanner Canon CanoScan 3000ex button may not operate after you install the driver. In this case, restart the system. O When you preview or scan an image with a relatively uniform background, the Auto Tone function may change its coloring. If this occurs, reset the Auto Tone. O With Windows Me, the scanner Canon CanoScan 3000ex may not be detected after the USB cable has been disconnected and reconnected.
If this occurs, please reboot the computer. O Some applications may close ScanGear CS automatically after scanning. Running ScanGear CS with Specific Applications o If more than one scanner exists on the system when using Caere PageKeeper or Caere OmniPage Pro, set the scanner being used as the default scanner in the Caere Scan Manager in the Control Panel. O Images after the first image can not be passed on to the linked application when the Multi Photo Scan function is used with Microsoft Word 2000, Excel 2000 or PowerPoint 2000. Notes when using the scanner Canon CanoScan 3000ex after switching users in Windows XP o The scanner Canon CanoScan 3000ex may be unable to operate if a large portion of the system resources, such as the memory, is being used by another user. In this case, close any programs that are open in the other user environment before scanning. O An error will occur if the user is switched while the ScanGear CS software is running (even when scanning is in progress).
Before switching the user, exit the ScanGear CS software, and then save the scanned image. Restart the system if the error has occurred. Canon Scanner WIA Driver 1.2.1 - 1. Canon Scanner WIA Driver 1.2.1 Features Canon Scanner WIA Driver 1.2.1 (hereafter referred to as 'Canon Scanner WIA Driver') is a WIA and TWAIN-compliant scanner driver for the Canon Scanner. When this driver is selected from within a WIA or TWAIN-compliant software application program, scanners can be used to scan image data. Canon Scanner WIA Driver also can work as an stand-alone program.
What You Need Required Hardware o Computer:IBM or IBM compatible PC. O 233 megahertz (MHz) Pentium or higher microprocessor (or equivalent) o RAM: 128 megabytes (MB) recommended (64 MB of RAM minimum;4 gigabytes (GB) of RAM maximum) o Free disk space, at least 50 MB. The amount of space required depends on the scanning area and the Color Mode or Resolution setting. (Color images scanned at higher resolution require more storage space.) o Canon scanners CanoScan 3000/3000F Required Software o Microsoft Windows XP Home Edition/Professional o WIA or TWAIN-compliant application software 3. A General Tip on Usage Canon CanoScan 3000ex o The Canon Scanner WIA Driver and ScanGear CS (TWAIN driver) cannot be present (installed) on the same system for the same scanner at the same time. O Some of the Canon Scanner WIA Driver functions are limited in comparison to ScanGear CS.
Please use ScanGear CS if you wish to use the functions not included in the Canon Scanner WIA Driver. O The Canon Scanner WIA Driver cannot be used to scan film (transparencies). O With some application programs, an error may stop the scan of a large image, especially a large image scanned at a high resolution. If this happens, try lowering the resolution or decreasing the size of the scan area before rescanning. O Some TWAIN compliant applications don't show scanner driver User Interface. Canon Scanner WIA Driver does not support such applications.
Please use the application, which shows scanner driver User Interface. Good buy pla hot usb noise canceling mic for macbook pro. Running Canon Scanner WIA Driver with Applications o CanoScan Toolbox CS does not support the Canon Scanner WIA Driver. O It may not be possible to start up some applications (such as ArcSoft PhotoStudio or ArcSoft PhotoBase) even when the start button on the scanner's front panel is pressed. O When this driver is started up and scanning is canceled from Adobe Photoshop Elements or Adobe Photoshop 6.0, the following message appears: 'Could not complete the Import command because there is no scanner installed.' O Do not switch the user (Switch User) while scanning is in progress.
Otherwise, it may not be possible to perform scanning properly. Disclaimer Some application software packed with this product does not satisfy Microsoft's 'Designed for XP Logo Requirement.'
ScanGear CS 8.3.0.0 - 1. ScanGear CS 8.3 Features ScanGear CS 8.3 for Windows (hereafter referred to as 'ScanGear CS') is a 32-bit TWAIN-compliant scanner driver for Canon CanoScan 3000/3000F scanner. When this driver is selected from within a TWAIN-compliant application program, this scanner can be used to scan image data.
A General Tip on Usage Canon CanoScan 3000ex o Only run one application at a time that is actively linked to ScanGear CS. Do not open more than one application that is actively linked to ScanGear CS. Also, do not open ScanGear CS more than once to acquire an image in the same application.
Canoscan 3000 Mac
O If you scan a very large image at high resolution, some applications may determine that there is not enough disk space to scan and save the image, and will return an error. O If the image size is large, such as when you scan a large image at a high resolution, for using some applications, the progress bar may freeze at 0% due to limitations of the application. In this case, click the Cancel button on the progress bar, and then select a smaller area or lower resolution and try scanning again. O With Windows 2000 or XP, the TWAIN data source may not open correctly from time to time when the system file is in the NTFS format.
For security reasons, the TWAIN module cannot be written to the 'winnt' directory. For details, contact your system administrator. O Some application programs may hide the TWAIN user interface. In this case, refer to the application programer's manual to find out the required setting changes to show the TWAIN user interface. O Always close the ScanGear CS main window before you exit the parent application program. O With Windows 2000 or XP, the system administrator is required to install or uninstall ScanGear CS. O Certain personal computers (including laptops) may not restart correctly from standby mode when the scanner Canon CanoScan 3000ex is attached.
If this occurs, please reboot the computer. O The scanner Canon CanoScan 3000ex button may not operate after you install the driver.
In this case, restart the system. O When you preview or scan an image with a relatively uniform background, the Auto Tone function may change its coloring. If this occurs, reset the Auto Tone. O With Windows Me, the scanner Canon CanoScan 3000ex may not be detected after the USB cable has been disconnected and reconnected. Convert multiple word documents to pdf mac. If this occurs, please reboot the computer. O Some applications may close ScanGear CS automatically after scanning. Running ScanGear CS with Specific Applications o If more than one scanner exists on the system when using Caere PageKeeper or Caere OmniPage Pro, set the scanner being used as the default scanner in the Caere Scan Manager in the Control Panel.
O Images after the first image can not be passed on to the linked application when the Multi Photo Scan function is used with Microsoft Word 2000, Excel 2000 or PowerPoint 2000. Notes when using the scanner Canon CanoScan 3000ex after switching users in Windows XP o The scanner Canon CanoScan 3000ex may be unable to operate if a large portion of the system resources, such as the memory, is being used by another user. In this case, close any programs that are open in the other user environment before scanning. O An error will occur if the user is switched while the ScanGear CS software is running (even when scanning is in progress).
Canon Lbp 3000 For Mac
Canon Canoscan Driver Windows 7
Canoscan 3000 For Mac Installer
Before switching the user, exit the ScanGear CS software, and then save the scanned image. Restart the system if the error has occurred.
